| | |
GEMT3 Taurus 3
| Taurus 3 Ring Saw
PRICE: $445.00 (Excluding: TX State Sales Tax at 6.75%) |
|
|
GEMT2 - Taurus II.2
| TAURUS II.2 RING SAW - This saw has the same motor and stainless steel blade as the more expensive Taurus I saw, but fewer moving part - which means less maintenance. The 5 3/4" stainless steel diamond coated blade outlast glass band saw blades by at least 4 to 1. The blade cuts in any direction and leaves a nice smooth edge. You can cut 1/8" pieces, small curves and intricate detail. It also cuts metal, tile, plastic, stone, gold and silver. Sale Price
PRICE: $375.00 |
|
|
GEMT2AK - Accessory Kit
| TAURUS II ACCESSORY KIT - This kit inlcudes: 2 circle makers, 45 degree cutoff triangle, 10 degree lamp wedge, 30 & 60 degree cut triangle, self contained spot light, 45 degree edger, combination face shield and magnifier and 2 hole reducers.
PRICE: $55.00 |
|
|
TAURUS PARTS
| Select the part(s) you need.
|
GEMT2BL- Standard replacement blade - $82.95
GEMBLSEP - Separating blade - $82.95
GEMDB - Drive belt - $22.00
GEMGR - Yellow Grommets - $2.10
GEMGE - Red Grommets - $2.10
GEMP - Blue Grommets with bearing - $14.60
GEMR2 - R2 bearings - $8.40
GEMT3BL - $82.95
|
|
GRY Omni2 - Omni 2 Saw
| GRYPHON OMNI-2 WIRE SAW - Glass cutting saw that cuts in any direction. It has a water feed to the blade, easy emptying drain and is the last wire saw to enter the market. Blades are inexpensive and can be inserted into a hole in glass to make interior cuts. The built in spotlight and low maintenace is turning a lot of heads. Sale Price
PRICE: $362.00 |
|
|
OMNI-2 PARTS
| OMNI SAW PART - Select from below.
|
GRYB3 - 3 power blade pack - $23.71
GRYBG - upper and lower blade guides - $8.24
|
|
GRYMS1 - Came Saw
| GRYPHON CAME SAW - Cuts brass, zinc and non-ferrous metals at 7000 rpm. Is calibrated to cut at any angles or 90 degrees. A very good saw. Sale Price
PRICE: $305.00 |
|
|
CHOP7990 Chop Saw
| MITRE CHOP SAW - A reliable safe saw with a 4" blade that adjusts to any angle between 45 and 90 degrees. A 1/5 HP motor drives a fine tooth blade which cuts lead, zinc, wood, coppe and brass came. Has automatic shutoff switch and blade guard. Comes with 3 year warrenty. Sale Price
PRICE: $202.00 |
|
|
IN90003 - DB100 Band Saw
| INLAND DB-100 BANDSAW - This versitile saw will cut almost anything. The enclosed Diamond Coated blade cuts glass, marble, ceramic tile, porcelain, plastic, fiberglass and most non-ferrous metals, such as lead, zinc, brass and copper. It has a hefty 30 oz-in torque motor running at 2500 rpm and 115 volts. Sale Price
PRICE: $222.00 |
|
|
IN90007- DB100 Blade
| INLAND DB-100 BLADE - Standard replacement blade for DB100 band saw.
PRICE: $72.45 |
|
|
DLS - Speedster Saw
| SPEEDSTER BANDSAW - This affordable band saw is built by Diamond Tech. It cuts 20" per minute. Blade tracking is preset and tension is automatic. It has a large capacity water reserve, a powerful 1/8 HP motor and a sturdy metal frame. Comes with a free extra diamond blade and 3 year warrenty. Sale Price
PRICE: $256.00 |
|
|
DL3000 - Bandsaw
| DL-3000 BANDSAW - All metal frame with 10"x12" metal table. A gravity fed syphon keeps water to the blade. Powerful 1/7 HP motor. Saws 2 to 3 times faster than other band saws. Has a 3 year warrenty, except for the blade. Sale Price
PRICE: $467.00 |
|
|
DL5000 - Bandsaw
| DL-5000 BANDSAW - The DL 5000 Diamond Tech bandsaw is the ultimate saw. It can cut intricate shapes in glass up to 12 1/2" wide and 2 1/2" thick. The powerful 1/2 HP motor makes it easy work of even the thickest glass. A recirculating water pump keeps a steady flow of water to the blade. An oversize 15" x 13" cutting table provides stability for even the largest cut. It has a 3 year manufacturer's warrenty which covers everything but the blade. Sale Price
PRICE: $1,224.00 |
|